The multivalves for LPG tanks, model AT02, are homologated in accordance with the new European Regulation ECE 67R-01 and with the Indian Standards IS-15100 and are provided with all the safety devices stated by the Regulation: pressure relief valve (PRV), thermo-fuse element (PRD), 80% automatic filling stop (*), solenoid valve at the outlet, excess flow valve, non-return valve, manual (service) valve and mechanical level indicator.
The high flows of the safety devices (PRD and PRV) make the Tomasetto AT02 multivalves a leading product on the market. Severe bon-fire tests, performed by the most important tanks manufacturers, have been brilliantly completed.
AT02 multivalves are available for all the different types of tanks present on the market, both cylindrical and toroidal. Some cylindrical multivalves are also foreseen in left configuration.
In our range of products there are two available versions:
- standard version: with outlet fitting for ř6 mm pipe and solenoid valve hole ř3.0 mm
- extra version: with outlet fitting for ř8 mm pipe and solenoid valve hole ř 4.5 mm
| AT02 Multivalve homologation |
E8 67R-01 3018 |
| Current extension of homologation |
EXT 28 |
(*) As requested by the Regulation 67R-01 (Part II) the installer must verify during the lpg filling that the couple multivalve-tank and its positioning on the vehicle allow the correct functioning of filling limiter device, which has to activate within 80% of tank volume.
» 
